ECS PM800-M2, Руководство пользователя, Страница: 45 / 67

41
Using BIOS
Modem Ring Resume (Disabled)
Use this item to enable modem activity to wakeup the system from a power saving mode.
RTC Alarm Resume (Disabled)
When set to Enabled, additional fields become available and you can set the date (day of the
month), hour, minute and second to turn on your system. When set to 0 (zero) for the day
of the month, the alarm will power on your system every day at the specified time.
Press <Esc> to return to the Power Management Setup page.
Press <Esc> to return to the IRQ/Event Activity Detect page.
IRQs Activity Monitoring (Press Enter)
This screen enables you to set IRQs that will resume the system from a power saving mode.
!
Set any IRQ to Enabled to allow activity at the IRQ to wake up the system from a power
saving mode.
!
Phoenix-AwardBIOS CMOS Setup Utility
IRQs Activity Monitoring
Item Help
Menu Level
"#$%
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Primary INTR [ON]
IRQ3 (COM2) [Disabled]
IRQ4 (COM1) [Enabled]
IRQ5 (LPT2) [Enabled]
IRQ6 (Floppy Disk) [Enabled]
IRQ7 (LPT 1) [Enabled]
IRQ8 (RTC Alarm) [Disabled]
IRQ9 (IRQ2 Redir) [Disabled]
IRQ10 (Reserved) [Disabled]
IRQ11 (Reserved) [Disabled]
IRQ12 (PS/2 Mouse) [Enabled]
IRQ13 (Coprocessor) [Enabled]
IRQ14 (Hard Disk) [Enabled]
IRQ15 (Reserved) [Disabled]
!
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help