ECS P4VXMS Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 84

ECS P4VXMS Скачать руководство пользователя страница 50

44

•

Typematic Delay (250 Msec):

Use this item to define

how many milliseconds must elapse before a held-
down key begins generating repeat characters.

Security Option (Setup)

If you have installed password protection, this item defines if
the password is required at system start up, or if it is only re-
quired when a user tries to enter the Setup Utility.

OS Select For DRAM > 64 MB (Non-OS2)

This item is only required if you have installed more than 64
MB of memory and you are running the OS/2 operating sys-
tem. Otherwise, leave this item at the default.

HDD S.M.A.R.T Capability (Disabled)

The S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting
Technology) system is a diagnostics technology that monitors
and predicts device performance. S.M.A.R.T. software resides
on both the disk drive and the host computer.

The disk drive software monitors the internal performance of
the motors, media, heads, and electronics of the drive. The
host software monitors the overall reliability status of the drive.
If a device failure is predicted, the host software, through the
Client WORKS S.M.A.R.T applet, warns the user of the im-
pending condition and advises appropriate action to protect
the data.

Video BIOS Shadow (Enabled)

This function, when enabled allows VGA BIOS to be copied to
the system DRAM for enhanced performance.

Small Logo (EPA) Show (Disabled)

Determines whether or not the EPA logo appears during boot
up.

«
...
48
49
50
51
52
...
»

Содержание P4VXMS





















































































Отзывы:

Нет отзывов