ECS P4S8A, Руководство пользователя, Страница: 5 / 49

1: Introduction
Chapter 1
Introduction
This mainboard has a Socket-478 processor socket for Intel
Pentium 4 type of processors supporting front side bus (FSB)
speeds up to 533 MHz .
This mainboard integrates the SiS648 Northbridge along with
SiS963 Southbridge chipsets that supports built-in AC97 Codec
support 6-channel speak-out, 2 DDR400 (by overclocking)
modules up to 2GB system memory. This mainboard has one CNR
(Communications and Networking Riser) slot to support Audio and
Modem application, and built-in
10BaseT/100BaseTX Network
Interface (optional) . It supports the Xabre200 GPU , which
integrates a 256-bit 3D/2D graphics engine and a motion
compensation MPEG I/MPEGII accelerator.
There is a full set of I/O ports including two PS/2 ports for mouse
and keyboard, one serial port, one VGA port, one parallel port, one
IEEE1394a port (optional) and six USB ports (
USB2.0 )– four
back-panel ports and onboard USB header USB3 providing two
extra ports by connecting the Extended USB Module to the
mainboard.
This mainboard is an ATX mainboard that uses a 4-layer printed
circuit board and measures 305 x 220mm.
1