ECS P4S8A Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 49

ECS P4S8A Скачать руководство пользователя страница 34

Mainboard User’s Manual

ACPI Aware O/S

Enable this item if you are using an O/S that
supports ACPI function such as Windows
98/ME /2000.

Power

Management

Use this item to select a power management
scheme. Both APM and ACPI are supported.

Suspend Time Out

This sets the timeout for Suspend mode in
minutes. If the time selected passes without any
system activity, the computer will enter power-
saving Suspend mode.

Hard Disk Time

Out

This sets the timeout to power down the hard disk
drive, if the time selected passes without any hard
disk activity.

Resume On RTC

Alarm Date / Hour /

Minute / Second

The system can be turned off with a software
command. If you enable this item, the system can
automatically resume at a fixed time based on the
system’s RTC (realtime clock). Use the items
below this one to set the date and time of the
wake-up alarm. You must use an ATX power
supply in order to use this feature.

LAN/Ring Power

On

The system can be turned off with a software
command. If you enable this item, the system can
automatically resume if there is an incoming call
on the Modem. You must use an ATX power
supply in order to use this feature.

KeyBoard Power

On

If you enable this item, you can turn the system on
and off by pressing hot keys on the keyboard. You
must enable the Keyboard Power On jumper and
use an ATX power supply in order to use this
feature.

PCI / Plug and Play Setup Page

This page sets some of the parameters for devices installed on the
PCI bus and devices that use the system plug and play capability.

AMIBIOS SETUP – PCI / PLUG AND PLAY SETUP

(C) 2000 American Megatrends, Inc. All Rights Reserved

Plug and Play Aware O/S

Yes

Primary Graphics Adapter

PCI

Allocate IRQ for PCI VGA

Yes

PCI IDE BusMaster

Disabled

ESC : Quit



: Select Item

F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color

30

«
...
32
33
34
35
36
...
»

Содержание P4S8A


















































Отзывы:

Нет отзывов