PM Wake Up Events
Scroll to this item and press <Enter> to view the following screen:
Phoenix – AwardBIOS CMOS Setup Utility
PM Wake Up Events
Item Help
IRQ [3-7, 9-15], NMI
[Enabled]
IRQ 8 Break suspend
[Disabled]
Ring/WOL/WOM PowerUp Contl
[Disabled]
PCIPME Power Up Control
[Enabled]
USB S3 WakeUp Function
[Disabled]
PS2KB WakeUp from S3
[]
PS2MB WakeUp from S3
[]
Power Up by Alarm
[Disabled]
x Month
Alarm
NA
x
Date (of Month)
0
x
Time (hh:mm:ss)
0 0 0
Menu Level
↑
↓
→
←
: Move
Enter : Select
+/-/PU/PD:Value:
F10: Save ESC: Exit F1:General Help
F5:Previous Values
F6:Fail-Safe Defaults
F7:Optimized Defaults
This item opens a submenu that enables you to set events that will resume
the system from a power saving mode.
IRQ [3-7, 9-15], NMI (Enabled)
This option determines whether any activity for IRQ 3-7/9-15 will cause the
system to wake from a power saving mode.
IRQ 8 Break Suspend
Determines whether the system will monitor IRQ 8 activity and wake the sys-
tem from a power saving mode when IRQ 8 is activated.
Ring/WOL/WOM PowerUp Contl (Disabled)
Use this item to enable LAN or modem activity to wakeup the system from a
power saving mode.
PCIPME Power Up Control (Enabled)
Use this item to enable PCI activity to wakeup the system from a power sav-
ing mode.
USB S3 Wakeup Function (Disabled)
This option allows you to specify whether the system will be awakened from
power saving modes when activity or input signal of the specified hardware
peripheral or component is detected.
PS2 KB/MB Wakeup from S3 ()
Enables you to allow keyboard/mouse activity to awaken the system from
power saving mode using hot keys.
Power Up by Alarm (Disabled)
When set to Enabled, the following three fields become available: Month
Alarm, Day of Month Alarm, and Time Alarm Upon arrival of the alarm time, it
will instruct the system to wake up.
43