39
PM Wake Up Events
Scroll to this item and press <Enter> to view the following screen:
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
PM Wake Up Events
Item Help
IRQ [3-7, 9-15], NMI
[Enabled ]
IRQ 8 Break suspend
[Disabled]
Ring/WOL/WOM PowerUp Contl
[Disabled]
PCIPME Power Up Control
[Enabled]
Power Up by Alarm
[Disabled]
x
Month Alarm
NA
x
Date (of Month)
0
x
Time (hh:mm:ss)
0 0 0
Menu Level
-
¯
®
¬
: Move
Enter : Select
+/-/PU/PD:Value:
F10: Save
ESC: Exit
F1:General Help
F5:Previous Values
F6:Fail-Safe Defaults
F7:Optimized Defaults
This item opens a submenu that enables you to set events that will resume
the system from a power saving mode.
IRQ [3-7, 9-15], NMI (Enabled)
This option determines whether any activity for IRQ 3-7/9-15 will cause the
system to wake from a power saving mode.
IRQ 8 Break Suspend
Determines whether the system will monitor IRQ 8 activity and wake the sys-
tem from a power saving mode when IRQ 8 is activated.
Ring/WOL/WOM PowerUp Contl (Disabled)
Use this item to enable LAN or modem activity to wakeup the system from a
power saving mode.
PCIPME Power Up Control (Enabled)
Use this item to enable PCI activity to wakeup the system from a power sav-
ing mode.
Power Up by Alarm (Disabled)
When set to Enabled, the following three fields become available: Month
Alarm, Day of Month Alarm, and Time Alarm Upon arrival of the alarm time, it
will instruct the system to wake up.
When set to 0 (zero) for the day of the month, the alarm will power on your
system every day at the specified time.