19
AUDIO1: Front panel MIC/line-out
This header allows the user to install auxiliary front-oriented microphone and
line-out ports for easier a ccess.
Pin
Signal Name
Pin
Signal Name
1
3
5
7
9
AUD_MIC
MIC_BIAS
AUD_F_R
RESERVED
AUD_F_L
2
4
6
8
10
AUD_GND
AUD_VCC
AUD_RET_R
KEY
AUD_RET_L
USB2/USB3: Front panel USB ports
The mainboard has two USB ports installed on the rear edge I/O port array.
Additionally, some computer cases have USB ports at the front of the case. If
you have this kind of case, use auxiliary USB connectors USB2 and USB3 to
connect the front-mounted ports to the mainboard.
Pin
Signal Name
Pin
Signal Name
1
3
5
7
9
USBPWR0
USB_FP_P0-
US
GROUND
KEY
2
4
6
8
10
USBPWR1
USB_FP_P1-
US
GROUND
USB_FP_OC0
WOL1/WOM1: Wake On LAN/Wake On Modem
If you have installed a LAN card, use the cable provided with the card to plug
into the mainboard WOL1 connector. This enables the Wake On LAN (WOL)
feature. When your system is in a power-saving mode, any LAN signal auto-
matically resumes the system. You must enable this item using the Power
Management page of the Setup Uti lity.
Pin
Signal Name
1
2
3
5VSB
Ground
SENSE
If you have installed a modem, use the cable provided with the modem to plug
into the mainboard WOM1 connector. This enables the Wake On Modem
(WOM) feature. When your system is in a power-saving mode, any modem
signal automatically resumes the system. You must enable this item using the
Power Management page of the Setup Utility. See Chapter 3 for more info r-
mation.