17
4.
Plug a power cable from the case power supply into the power connector on
the FDD (
C
).
When you first start up your system, go immediately to the Setup Utility to
configure the floppy diskette drives that you have installed. See Standard
CMOS Features on page 27 for more info rmation.
Installing Add-on Cards
This mainboard has three 32-bit PCI (Peripheral Components Interconnect)
expansion slots, one 4xAGP slot
*
, and one Communications and Networking
Riser (CNR) slot.
PCI Slots
PCI slots are used to install expansion cards that have the 32-bit
PCI interface.
4xAGP Slot
The L4IBMG mainboard comes with an Accelerated Graphics Port
Pro slot that supports AGP cards for high performance, component
level interconnect targeted at 3D graphical applications using a 4X
mode bus. This slot can also support upgradeable external AGP
card and Intel ADD (AGP Digital Display) Card which allows con-
figuration for TV-out, LDVS and TMDS output.
CNR Slot
This slot is used to insert CNR cards with Modem and Audio func-
tionality or Intel PHY LAN CNR card.
*
This is only present on the L4IBMG mainboard.