Load Optimal Settings
If you select this item and press
Enter
a dialog box appears. If you press
Y
,
and then
Enter
, the Setup Utility loads a set of fail-safe default values. These
default values are not very demanding and they should allow your system to
function with most kinds of hardware and memory chips.
Note:
It is highly recommended that users enter this option to load optimal val-
ues for accessing the best performance.
Load Best Performance Settings
If you select this item and press
Enter
a dialog box appears. If you press
Y
,
and then
Enter
, the Setup Utility loads a set of best-performance default val-
ues. These default values are quite demanding and your system might not
function properly if you are using slower memory chips or other low-
performance components.
Features Setup Page
This page sets some of the parameters for peripheral devices connected to
the system.
AMIBIOS SETUP – FEATURES SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
OnBoard FDC
Enabled
OnBoard Serial PortA 3F8h/COM1
OnBoard Serial PortB 2F8h/COM2
Serial Port2 Mode
Normal
OnBoard Parallel Port
378h
Parallel Port Mode
SPP
Parallel Port IRQ
7
Parallel Port DMA
N/A
OnBoard Game Port
201h
OnBoard MIDI Port
300h
MIDI Port IRQ
10
OnBoard PCI IDE
Both
OnBoard AC’97 Sound
Enabled
OnBoard AC’97 Modem
Enabled
OnBoard LAN
Enabled
USB Function Support
Enabled
USB Function for DOS
Disabled
ThumbDrive Support for DOS Disabled
ESC : Quit
↑↓←→
: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
OnBoard FDC
Use this item to enable or disable the onboard floppy disk drive interface.
OnBoard Serial PortA/B
Use these items to enable or disable the onboard COM1/2 serial port, and to
assign a port address.
Serial Port2 Mode
Use this item to allocate the resources of the second serial port. Under Nor-
mal, the resources are allocated to the onboard serial port. Under ASKIR or
31
