manualshive.com logo in svg

ECS H67H2-1, Руководство пользователя

Поделиться
Скачать
ECS H67H2-1 Скачать руководство пользователя страница 41

37

Using BIOS

All USB Devices (Enabled)

Use this item to enable or disable all USB devices.

USB Configuration

Use this item to show the information of USB configuration.

+/-  : Change Opt.

Enter : Select

:Select Screen

:Select Item

USB Configuration

All USB Devices

[Enabled]

USB 3.0 Controller

[Enabled]

          F1:General Help

Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.

          F2:Previous Values

          F3:Optimized Defaults

          F4:Save & Exit

          ESC:Exit

 

Version 2.02.1205. Copyright (C) 2010, American Megatrends, Inc.

Enabled/Disabled All USB
Devices

Legacy USB Support

[Enabled]

Bluetooth Function

[Enabled]

Main

  Advanced 

  Chipset     M.I.B III     Boot     Security    Save & Exit

USB 3.0 Controller (Enabled)

Use this item to enable or disable USB 3.0 controller. We recommand users keep the
default value. Disabling it might cause the USB devices not to work properly.

Legacy USB Support (Enabled)

Use this item to enable or disable support for legacy USB devices.

Press <Esc> to return to the Advanced Menu page.

Bluetooth Function (Enabled)

Use this item to enable or disable onboard USB Bluetooth Device.

Содержание H67H2-1



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды