manualshive.com logo in svg

ECS H67H2-1, Руководство пользователя

Поделиться
Скачать
ECS H67H2-1 Скачать руководство пользователя страница 35

31

Using BIOS

SMART Fan start PWM value (180)

SMART Fan start TEMP(-) (30)

This item is used to set the start PWM value of the smart fan.

This item is used to set the start temperature of the smart fan.

DeltaT (+3)

This item specifies the range that controls CPU temperature and keeps it from going
so high or so low when smart fan works.

SMART Fan Slope PWM value (10 PWM value/unite)

This item is used to set the Slope Select PWM of the smart fan.

This item is used to set the CPU fan full speed offset value.

CPU Fan Full Speed Offset(-) (23)

Smart Fan Mode (Normal)

This item allows you to select the fan mode (Normal, Quiet, Silent, or Manual) for a
better operation environment. If you choose Normal mode, the fan speed will be auto
adjusted depending on the CPU temperature. If you choose Quite mode, the fan speed
will be auto minimized for quiet environment. If you choose Silent  mode, the fan
speed will be auto restricted to make system more quietly. If you choose Manual
mode, the fan speed will be adjust depending on users’ parameters.

Press <Esc> to return to the PC Health Status page.

      •

CPU Vcore

      •

IMC Voltage

      •

VDIMM

      •

PCH Voltage

System Component Characteristics

These items display the monitoring of the overall inboard hardware health
events, such as System & CPU temperature, CPU & DIMM voltage, CPU &
system fan speed,... etc.

Press <Esc> to return to the Advanced Menu page.

System Smart FAN Control (Enabled)

This item allows you to enable/disable the control of the system fan speed by chang-
ing the fan voltage.

This item is used to set the system fan full speed offset value.

System Fan Full Speed Offset(-) (23)

Содержание H67H2-1



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды