background image

26

Using BIOS

Standard CMOS Setup

This option displays basic information about your system.

     Help Item

CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.

Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.

Use [+] or [-] to
configure system Date.

Standard CMOS Setup

Date & Time

The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.

f

f
f

f

 Date (www mm:dd:yy)

Mon  11/22/2010

 Time  (hh:mm:ss)

21:17 :03

SATA1

                        Hard Disk

SATA2

                        Not Detected

SATA3

 ATAPI CDROM

SATA4

 Not Detected

 IDE BusMaster

Enabled

mnlk

: Move

F10: Save     ESC: Exit

Enter : Select

+/-/: Value

F9: Load Default Settings

F1: General Help

SATA1~4

f

This motherboard supports four SATA channels and each channel allows one SATA
device to be installed. Use these items to configure each device on the SATA channel.

IDE BusMaster (Enabled)

This item enables or disables the DMA under DOS mode. We recommend you to leave
this item at the default value.

Press <Esc> to return to the main menu setting page.

Содержание G41T-M13





















































Отзывы: