ECS B75H2-M3 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 72

background image

Chapter 3

B75H2-M3 USER MANUAL

34

Smart Fan Mode (Normal)

This item allows you to select the fan mode (Normal, Quiet, Silent, or Manual) for a
better operation environment. If you choose Normal mode, the fan speed will be
auto adjusted depending on the CPU temperature. If you choose Quite mode, the
fan speed will be auto minimized for quiet environment. If you choose Silent mode,
the fan speed will be auto restricted to make system more quietly. If you choose
Manual mode, the fan speed will be adjust depending on users’ parameters.

Smart Fan start PWM value (180/80)

Smart Fan start PWM TEMP(-) (30)

This item is used to set the start PWM value of the smart fan.

This item is used to set the start temperature of the smart fan.

DeltaT (+3)

This item specifies the range that controls CPU temperature and keeps it from going
so high or so low when smart fan works.

Smart Fan Slope PWM value (10 PWM value/unite)

This item is used to set the Slope Select PWM of the smart fan.

This item is used to set the CPU/System/Power fan full speed offset value.

CPU/System/Power Fan Full Speed Offset(-) (23/13/13)

Press <Esc> to return to the PC Health Status page.

•

CPU Fan Speed

•

System Fan Speed

•

Power Fan Speed

•

CPU Voltage

•

DIMM Voltage

•

VTT Voltage

System Component Characteristics

These items display the monitoring of the overall inboard hardware health events,
such as System temperature, CPU & DIMM voltage, CPU & System fan speed... etc.

Press <Esc> to return to the Adva+nced Menu page.

CPU/System/Power Smart Fan Control (Enabled)

This item enables you to define the CPU/System/Power by smartly adjusting the
CPU/System/Power Fan. When it is set at certain temperature, the CPU/System/
Power Fan PWM value will change accordingly.

«
...
36
37
38
39
40
...
»

Содержание B75H2-M3









































































Отзывы:

Нет отзывов

Похожие инструкции для B75H2-M3

Бренд: CompuLab Страницы: 31

Бренд: ECS Страницы: 56

Бренд: DFI Страницы: 8

MBD-J-JNC9VL-H81

Бренд: JETWAY Страницы: 43

Бренд: Norco Страницы: 78

Бренд: ASROCK Страницы: 6

Бренд: Nuvoton Страницы: 14

Бренд: ON Semiconductor Страницы: 19

Бренд: Variscite Страницы: 2

Бренд: austriamicrosystems Страницы: 19

Бренд: IEI Technology Страницы: 21

Бренд: Gigabyte Страницы: 40

Бренд: ON Semiconductor Страницы: 8

Бренд: OLIMEX Страницы: 26

MAG B560M BAZOOKA

Бренд: MSI Страницы: 136

Бренд: MSI Страницы: 134

Бренд: ASROCK Страницы: 125

Бренд: Laird Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды