Chapter 2
11
B75H2-M3 USER MANUAL
A. Apply some thermal grease onto the contacted area between the
heatsink and the CPU, and make it to be a thin layer.
B. Fasten the cooling fan supporting base onto the CPU socket on the
motherboard. And make sure the CPU fan is plugged to the CPU fan
connector.
C. Connect the CPU cooler power connector to the CPU_FAN connector.
2-4-2. Installing the CPU Cooler
•
Install the cooling fan in a well-lit work area so that you can clearly see the
motherboard and processor socket.
•
Avoid using cooling fans with sharp edges in case the fan casing and the
clips cause serious damage to the motherboard or its components.
•
To achieve better airflow rates and heat dissipation, we suggest that you
use a high quality fan with 3800 rpm at least. CPU fan and heat sink instal-
lation procedures may vary with the type of CPU fan/heatsink supplied.
The form and size of fan/heatsink may also vary.
•
DO NOT remove the CPU cap from the socket before installing a CPU.
•
Return Material Authorization (RMA) requests will be accepted only if the
motherboard comes with the cap on the LGA1155 socket.
•
The following illustration shows how to install CPU fan.
Содержание B75H2-M3
Страница 8: ...Chapter 1 4 B75H2 M3 USER MANUAL Motherboard Components ...
Страница 64: ...Chapter 3 B75H2 M3 USER MANUAL 60 Memo ...
Страница 72: ...68 B75H2 M3 USER MANUAL Chapter 5 Memo ...