manualshive.com logo in svg

ECS A875M-A, Руководство пользователя, Страница: 41 / 74

Поделиться
Скачать
ECS A875M-A Скачать руководство пользователя страница 41

37

Using BIOS

SMART Fan start PWM value (154)

SMART Fan start TEMP (°C) (27)

This item is used to set the start PWM value of the smart fan.

This item is used to set the start temperature of the smart fan.

DeltaT1 (+3)

This item specifies the range that controls CPU temperature and keeps it from going
so high or so low when smart fan works.

SMART Fan Slope PWM value (3 PWM value/°C)

This item is used to set the Slope Select PWM of the smart fan.

This item is used to set the limit temperature of the smart fan.

CPU Fan Full Limit Temp  (60°C)

Press <Esc> to return to the PC Health Status page.

Shutdown Temperature (CPU) (Disabled)

Enable you to set the maximum temperature the CPU can reach before powering
down.

System Component Characteristics

These items display the monitoring of the overall inboard hardware health events,
such as CPU & NB temperature, CPU & NB & HT voltage, CPU fan speed,...etc.

•

CPU Temperature

•

NB Temperature

•

CPU Fan Speed

•

CPU Vcore

•

 VDIMM

•

 NB  Voltage

•

 HT Voltage

Press <Esc> to return to the main menu setting page.

Содержание A875M-A











































































Отзывы:

Нет отзывов