ECS A875M-A, Руководство пользователя, Страница: 13 / 74

9
Installing the Motherboard
Checking Jumper Settings
The following illustration shows the location of the motherboard jumpers. Pin 1 is
labeled.
Jumper Settings
1. To avoid the system unstability after clearing CMOS, we recommend
users to enter the main BIOS setting page to “Load Default Settings” and
then “Save & Exit Setup”.
2. Make sure the power supply provides enough 5VSB voltage before
selecting the 5VSB function.
3. It is required that users place the USBPWR_R1~2 & USBPWR_F1~2
cap onto 2-3 pin rather than 1-2 pin as default if you want to wake up the
computer by USB/PS2 KB/Mouse.
Rear USB PS/2
Power Select
Jumper
USBPWR_R1~2
Jumper Type Description
Setting (default)
CLR_CMOS
3-pin
Clear CMOS
1-2: NORMAL
2-3: CLEAR
Before clearing the
CMOS, make sure to
turn off the system.
CLR_CMOS
1-2: VCC
USBPWR_R1~2 3-pin
2-3: 5VSB
USBPWR_F1~2
1-2: VCC
USBPWR_F1~2 3-pin
2-3: 5VSB
1
1
Front Panel
USB Power
Select Jumper
1