ECS 661FX-M Deluxe, Руководство пользователя, Страница: 16 / 42

11
Installing the Motherboard
until it seats correctly. The slot latches are levered upwards and
latch on to the edges of the DIMM.
6. Install any remaining DIMM modules.
Table A: DDR (memory module) QVL (Qualified Vendor List)
The following DDR400 memory modules have been tested and qualified for
use with this motherboard.
Installing a Hard Dish Drive/CD-ROM/SATA Hard Drive
This section describes how to install IDE devices such as a hard disk drive and
a CD-ROM drive.
About IDE Devices
Your motherboard has a primary and secondary IDE channel interface (IDE1
and IDE2). An IDE ribbon cable supporting two IDE devices is bundled with
the motherboard.
You must orient the cable connector so that the pin1 (color)
edge of the cable correspoinds to the pin 1 of the I/O port
connector.
IDE1: Primary IDE Connector
The first hard drive should always be connected to IDE1.
IDE2: Secondary IDE Connector
The second drive on this controller must be set to slave mode. The
cinfiguration is the same as IDE1.