ECRON HFC-424W-1L, Руководство пользователя

Страница: 43 / 55

EN
43
BEFORE ASSEMBLING
Check that the box contains all of the components listed.
NOTE: when the motor is removed from the box, place it on
a soft cloth to avoid any damage to the decorated surface.
1. Support Plate
2. Bar
3. Light fixture 4. Motor
5. Blades (4)
6. Blade holder (1 per blade)
DO NOT MOUNT THE FAN ON A SUSPENDED CEILING,
MINERAL WOOL BOARDS OR PLASTERBOARD, ETC.
Choose a location for the fan where the blades are at a
minimum distance of 2.35mm from any objects. Mount the
support plate on the ceiling, or the plate already in use. In
order to fasten the plate correctly, use two self-threading
screws, to fix the plate to the beam or joist. If the place you
have chosen does not have a suitable beam for fastening,
install a 5 x 10 cm base between the ceiling joists to support
the fan.
1.- Attach the plate with the two screws included with the fan.
2.- Hang the fan on the hook on the decorative cover,
through a hole in the light fixture.
3.- Make electrical connections.
(See connection instructions)
4.- Secure the light fixture in the middle to the decorative
cover with the four screws provided. Turn the light fixture in an
anti-clockwise direction if necessary, to ensure that it is
securely installed.
5.- Attach each blade to its holder using three screws per
blade.
Then attach the holders to the fan using two screws per
holder.
6.- Attach the anchoring element(s).