ECRM Mako 8 CTP, Руководство оператора, Страница: 32 / 56

26 AG114123 Rev. 2
Error Messages
When an error condition occurs, an error message will appear on the
system display panel and the error indicator LED will light.
Additionally, if enabled the alarm will also sound.
Operator-Correctable Errors
The error messages you can clear are listed below.
COVERS ARE NOT SECURE - This error is displayed when one
of the system covers are not secure. Locate and close the open
cover, and then
OPERATOR ABORT - This error is displayed when the operator
aborts a job by using the ‘stop’ button on the control panel.
LASER IS OVER TEMPERATURE - Alerts you that the laser is
over temperature. If you override this error in the User Preferences
Menu, the laser life will be shortened.
IMAGE OFFSET ERROR, INCOMPATIBLE PARAMETERS -
This error is displayed when the combination margin, resolution,
magnification, media width, and image offset result in a condition
where the image starts before the laser can activate. If you should
encounter this error, minor adjustments to the above parameters, to
push the image to the center of the plate should resolve the problem.
Correcting Errors
Step 1. If a plate is in the machine when the error occurs, remove the plate
as explained in the last chapter.
Step 2. Correct the condition that caused the error.
Step 3. Press the control panel “OK” button.
Step 4. Resume normal operation.