ECRM Mako 8 CTP, Руководство оператора, Страница: 31 / 56

AG114123 Rev. 2 25
Status Messages
During operation, the system displays information that indicates the
current condition of the system and of any jobs in process. The
status messages appear on the control display.
PREPARING TO EXPOSE
- The system is starting the spinner
and moving the plate to the recording start position.
EXPOSING IMAGE
- The system is now recording an image.
EJECTING PLATE
- Exposing is complete and the plate is being
ejected onto the plate transport.
MOVING TO PROCESSOR
- Plate has been ejected from the
rollers and is moving to the processor.
FEEDING PROCESSOR
- Plate is on the transport and the
leading edge of the plate is moving into the processor.
EJECTING PLATE
- Exposing is complete and the plate is being
ejected onto the plate transport.
ONLINE
- The normal operating mode for the system.
STARTING SPINNER
- This message is accompanied by a
progress bar when preparing to start an image and the spinner
motor is stopped.
TEST PATTERNS
- Test Patterns mode has been selected in the
Test Patterns Menu and the system is ready to produce a test
pattern. This mode of operation should be used by qualified service
technicians only.
INITIALIZING
- The system is performing initialization functions
prior to going online.
WAITING FOR LASER
- The system is waiting for the laser to
warm up to normal operating temperature.