EPS-HDM1001 Encoder Modulator User
Manual
Chapter 3 Web-page Management
Users cannot use front buttons to set configuration, and can only control and set the
configuration in computer by connecting the device to web NMS Port. Users should ensure
that the computer’s IP address is different from the EPS-HDM1001 IP address; otherwise, it
would cause IP conflict.
3.1 Login
The factory default IP address is 192.168.0.136 and users can connect the device and web NMS
through this IP address.
Connect the PC (Personal Computer) and the device with a net cable, and use ping command to
confirm they are on the same network segment. For instance, the PC IP address is
192.168.99.252, we then change the device IP to 192.168.99.xxx (xxx can be 0 to 255 except
252 to avoid IP conflict).
Use web browser to connect the device with PC by inputting the device’s IP address in the
browser’s address bar and press Enter.
It will display the Login interface as Figure-1. Input the Username and Password (Both the
default Username and Password are “admin”.) and then click “Login” to start the device
setting.
Figure-1
3.2 Operation
When we confirm the login, it displays Homepage as Figure-2 where users can have an
overview of the device’s system information.
http://192.168.0.136
