1
Insert Upper Dividers onto Upper Shelf
Connect the Top Panel
2
3
Slide Middle Upper Back Panels into Place
Install the Lower Shelf
4
See Next Page
Align the slits on
Upper Dividers (F)
with the slit(s) on
Upper Shelf (C)
as shown,
and slide together until seated.
Install eight
Cam Posts (K1
) into the threaded plastic inserts on the underside of
Top Panel (B)
with a Phillips screwdriver.
Reminder:
Do not overtighten, as the plastic threads can be stripped.
Place two
Cam Locks (K2)
into the recessed holes on each
Upper Divider (F)
with the arrow
facing the closest edge.
Insert the
Top Panel (B)
Cam Posts into the holes on the top edge of the
Upper Dividers (F)
.
Turn the Cam Locks clockwise with a Phillips screwdriver to lock the
Upper Dividers (F)
onto
the posts.
Install the
Lower Shelf (D)
onto the
Upper Dividers (F)
as shown, with eight
Hex Screws (J)
using the Hex Tool.
Slide three
Upper Back Panels (H
) into the grooves on the
Upper Dividers (F)
as shown,
until fully seated into the groove on the underside of the
Top Panel (B)
.
Tip:
If the
Back Panels (H)
do not slide in easily, wiggle the panels while pushing into place.
