background image

14

15

BLE and Smartphone App

Extreme Temperature Mode

Bluetooth Low Energy

While your EcoJump is ON 

or in Standby Mode, it will 

communicate its battery 

level and temperature via 

Bluetooth Low Energy (BLE) 

to nearby smartphones. 

Download the EcoJump 

App to your smartphone. 

The App is available on the 

Apple App Store and the 

Google Play Store.

NOTE:

 The Bluetooth battery 

notifications do 

NOT

 work 

when EcoJump is OFF.

EcoJump App

The EcoJump is App 

connected and provides live 

updates on the EcoJump 

battery charge level and 

temperature to your 

smartphone. The EcoJump 

uses Bluetooth Low Energy 

Environmental

As an added safety 

precaution, in situations 

where the EcoJump battery 

is exposed to extreme 

temperatures (above 122°F 

or below 0°F), the EcoJump 

will turn off all charge out 

and charge in functions 

until the battery returns to 

a temperature within its 

safe operating range. The 

EcoJump Power Indicator 

will flash rapidly when in this 

Extreme Temperature Mode.

Extensive Use

If the EcoJump has been 

used extensively for multiple 

jump start attempts (10+) 

within a short period of 

time, the unit may start to 

get hot. If the EcoJump ever 

exceeds a safe operating 

temperature range, built-in 

safety protection circuitry 

will automatically turn the 

jump start function off, 

the 

DISCONNECT!

 and 

RECHARGE ECOJUMP

 

Status Lights will illuminate 

(solid 

RED

 and 

YELLOW

), 

and the jump start 

connection port will become 

inactive. After a period of 

time has passed to allow the 

EcoJump to cool down, the 

Status Lights will turn off and 

the jump start connection will 

automatically re-activate.

to send data to the EcoJump 

App on your smartphone 

whenever your smartphone 

is within range - typically 

about 30-60ft. You can 

configure the App to display 

pop-up warnings on your 

smartphone whenever the 

battery charge level has 

dropped below a given level 

or if the EcoJump unit is 

outside the recommended 

storage temperature range. 

These warnings sent to your 

smartphone help to ensure 

the EcoJump will be fully 

charged and ready for use 

when needed most.

NOTE:

 On iOS devices, 

the EcoJump App 

must be running in the 

background for the pop-

up warnings to display on 

your smartphone.

When the unit is in Standby 

Mode, the battery will stay 

over 50% charged for up to 6 

months. To optimize charge 

level while in storage, 

PRESS 

AND HOLD

 the 

Power 

Button

 

for approximately 

4 seconds to power OFF. In 

OFF mode, the EcoJump 

will stay over 50% charged 

for up to one year in a cool 

storage location, but your 

smartphone will 

NOT

 receive 

BLE battery notifications.
Temperature and other 

environmental conditions 

affect how long the EcoJump 

will stay charged while in 

storage. If you choose to 

not use the EcoJump App 

to receive BLE battery 

notifications, we recommend 

that you check your EcoJump 

charge status every 3 months 

and re-charge it as needed.

Содержание GDI-EXJMP1500











Отзывы: