EcoCast – Broadcast Your Music to
Multiple Speakers
When you have two or more EcoJourney speakers, you can
build a broadcast system by initiating EcoCast Transmitting
Mode in one EcoJourney speaker and broadcasting your
music to one or more EcoJourney speakers in EcoCast
Receiving Mode.
EcoCast: First Two Speakers
Follow the Pairing a Bluetooth Device instructions to
connect one EcoJourney (Speaker A) to your Bluetooth
device. After your device is connected to Speaker A,
you can select a song to play.
Press
on Speaker A to initiate EcoCast Transmitting
Mode. The Mode LED Indicator (the third LED Indicator
from the left) will flash Red, and the speaker will
announce,
“EcoCast
transmitting.”
Power on Speaker B speaker and press
to cycle
through to and initiate EcoCast Receiving Mode. The
Mode LED Indicator will flash Green, and the speaker will
announce, “EcoCast receiving.”
1
2
3
x50
A
B
Charge Your EcoJourney Prior to First Use
For best performance, fully charge your EcoJourney
before you turn it on for the first time. Connect the
USB-C port to the USB cable and a 5V, 2A power source.
Charge the unit until the LED Charging Status Indicator
and all four Battery Level Indicators are green, indicating
a full charge.
NOTE:
The LED Charging Status Indicator will only turn
on while the EcoJourney is connected to a 5V, 2A power
source. It will shine red while charging and switch to
green when the unit has reached a full charge.
Approximately 10-12 hours of charging is required from a
low to a full charge.
Power source options include the USB connection to
your computer or a power outlet using a 5V, 2A USB to
AC power adapter. It is recommended to always use the
USB cable included with your EcoJourney.
Power On, Battery, & LED Status Indicators
Once fully charged, press the Standby Power Button
on the front of your EcoJourney. You will hear, “Speaker
on, ready to connect” when powering on.
IMPORTANT:
Make sure that the Main Power Switch,
located on the Inside Panel, is set to the ON position. If
the switch is in the OFF position, your EcoJourney will
not be able to turn on using the Standby Power Button.
The LED battery level indicators are located on the front
of the unit. Each LED represents 25% of a charge, with 4
full LEDs indicating a full charge.
Audio playback time is approximately 50 hours at
50% volume.
Set Up Recommendations 1-2-3
1
2
