CAUTION: Prevent
Damage to Cables
Use caution while charging
the EcoJourney. The lid
contains the speakers and
battery, making it heavy. To
ensure you do not damage
the charging cable, position
the clasps so that they
prevent the lid from closing
fully. Propping the lid up
so that it remains partially
open will prevent the lid from
pinching the charging cable.
USB Output
Connect to the USB Output
(5V, 2A) port to charge your
personal device. Use the
USB cable included with your
personal device.
NOTE:
Charging rates are
similar to the charging rate
Prop Lid Open with
Both Clasps
when connected to the USB
of a desktop PC.
Charge time is approximately
3 hours from low to full
for most Smartphones;
however, charge times will
vary depending on the device
being charged, the device’s
battery specifications, and
the device features.
In some instances your
personal device may
not indicate if charge is
in process.
CAUTION:
Do
NOT
charge if
unit and/or connections are
wet or damp.
Audio AUX-IN
Connect an audio device
using the 3.5mm cable
connection as an alternative
to a Bluetooth connection to
your EcoJourney.
NOTE:
Volume level must
be controlled from the audio
device when connected to
the AUX-IN connection.
Power on the additional EcoJourney speaker(s)
(Speaker C and Speaker D). Press
to cycle through
to and initiate EcoCast Receiving Mode. The Mode LED
Indicator will flash Green, and the speaker(s) will
announce, “EcoCast receiving.”
On Speaker A (the speaker with the Mode LED Indicator
shining solid Red), PRESS AND HOLD
for 6
seconds. The Mode LED Indicator will flash Red.
Once the connection between the speakers is successful,
Speaker B will announce, “Connection Successful,” and
start playing music from your Bluetooth device.
EcoCast: Additional Receiving Speakers
4
1
2
A
C
D
B
