Bluetooth Pairing & Your Audio
Connecting With Bluetooth:
Connect To Your Smart Device & Play Audio
When your EcoExtreme 2 is turned on, the LED
Bluetooth Status Indicator on the Front Panel will flash
blue, indicating the unit is ready to pair.
Turn on Bluetooth on your Bluetooth device (Smart
Device) and set the device in pairing mode. Available
Bluetooth connections shall appear. Select the
ECOXGEAR-PTT speaker from the list of discovered
devices on your Bluetooth device. Wait for a few seconds
until the connection is completed.
NOTE:
Bluetooth connection feature is found in the
Settings section of most mobile phones and other
Bluetooth enabled devices.
When the ECOXGEAR-PTT selection is made and the
Bluetooth connection is completed, your EcoExtreme 2
will announce: “Your phone is connected.” The Bluetooth
Status Indicator will shine blue.
Once connected, select and play your desired audio.
Pairing Mode:
If the Bluetooth Status Indicator is not
flashing or if you wish to place your EcoExtreme 2 in
pairing mode, press and release the Bluetooth Button
on the Front Panel. Your EcoExtreme 2 shall announce,
“Ready to connect,” when ready to pair to a new device.
NOTE:
Your EcoExtreme 2 shall sync & wirelessly
pair with most Bluetooth enabled devices. The unit
remembers the last device paired and will automatically
search for previous connections when the speaker is
turned on or when a device comes back into Bluetooth
range. If a connection is lost due to range, the speaker
will look to re-establish that connection. If Bluetooth is
turned off on your Smart Device, the EcoExtreme 2 may
not automatically look for the device.
3
