You should always
1) Use the ECOXGEAR speaker in
accordance with any music or noise rules
and
regulations.
2) Use the proper ECOXGEAR mounts if you
intend to mount the unit.
3) Properly seal the ECOXGEAR prior and after
each use when in humid or water
environments to avoid water damage to the
internal components. Salt water / air is
particularly corrosive. Always make sure that
the gaskets are sealed when in salt water
environment and the unit properly rinsed off
after
use.
4) Properly clean the ECOXGEAR and ensure
the gaskets have no sand, dirt, or water on
them prior to storage or removing the
back
cover.
5) Store your unit with all caps properly sealed
to avoid long term internal moisture
damage inside your unit.
6) Completely dry and clean your ECOXGEAR
prior to attempting to charge the unit.
7) Return the ECOXGEAR to Grace Digital if
you suspect water ingress into the unit or if
the unit has experienced a severe impact
that may have affected the integrity of the
unit to take on water.
You should never
1)
NEVER
charge your ECOXGEAR if you
suspect water has entered the device.
Charging a device with water inside could
be potentially hazardous and cause fire
or a spark.
Speaker Volume
Press
to decrease or
to
increase Speaker Volume.
NOTE:
Some Bluetooth devices
may require to be manually set
for maximum audio level.
Your EcoEdge will beep to
indicate when maximum
volume setting is reached.
Track Selection
Press button once to select
Previous Song track
& Next
Song track
.
Play/Pause/Answer
Press button once to pause &
play song tracks and to answer
mobile calls (
MUST
be paired
with Bluetooth).
