Ecox EAEM series, Руководство пользователя

Страница: 6 / 16

6
EAEM
SPLIT-TYPE ROOM AIR CONDITIONER
For a detailed explanation of each function, refer to the
Remote Control Manual.
OTHER FEATURES
SETTING ANGLE OF AIR FLOW
Auto-Restart
If the unit loses power, it will automatically restart with the prior
settings once power has been restored.
Anti-mildew (some units)
When turning off the unit from COOL, AUTO (COOL), or DRY
modes, the air conditioner will continue operate at very low
power to dry up condensed water and prevent mildew growth.
Wi-Fi Control (some units)
Wi-Fi control allows you to control your air conditioner using
your mobile phone and a Wi-Fi connection.
Louver Angle Memory (some units)
When turning on your unit, the louver will automatically resume
its former angle.
Refrigerant Leakage Detection (some units)
The indoor unit will automatically display “EC” when it detects
refrigerant leakage.
For a detailed explanation of your unit’s advanced
functionality (such as TURBO mode and its self-cleaning
functions), refer to the Remote Control Manual.
Illustrations in this manual are for explanatory purposes. The
actual shape of your indoor unit may be slightly different. The
actual shape shall prevail.
On louver angles
When using COOL or DRY mode, do not set louver at too vertical an
angle for long periods of time. This can cause water to condense
on the louver blade, which will drop on your floor or furnishings.
(See Fig. 2.2).
When using COOL or HEAT mode, setting the louver at too vertical
an angle can reduce the performance of the unit due to restricted
air flow.
Do not move louver by hand. This will cause the louver to become
out of sync. If this occurs, turn off the unit and unplug it for a few
seconds, then restart the unit. This will reset the louver.
Do not put your fingers in or near the blower and suction side of the
unit. The high-speed fan inside the unit may cause injury.
Setting vertical angle of air flow
While the unit is on, use the SWING/DIRECT button to set the
direction (vertical angle) of airflow.
Press the SWING/DIRECT button once to activate the louver.
Each time you press the button, it will adjust the louver by 6°.
Press the button until the direction you prefer is reached.
To make the louver swing up and down continuously, press and
hold the SWING/DIRECT button for 3 seconds. Press it again to
stop the automatic function.
Setting horizontal angle of air flow
The horizontal angle of the airflow must be set manually. Grip
the deflector rod (See Fig.2.3) and manually adjust it to your
preferred direction. For some units, the horizontal angle of the
airflow can be set by remote control. please refer to the Remote
Control Manual.
NOTE
NOTE
1
2
CAUTION