ECOWITT WS2910, Руководство по эксплуатации

Страница: 27 / 72

27
[SET] Wind Units of
Measure Press [WIND +] to change
wind units of measure
between km/h, mph, knots,
m/s and bft.
[SET] Rain Units
of Measure Press [WIND +] to
change rain units of
measure between in and
mm.
[SET]
Hemisphere Press [WIND +] to change
hemisphere between NTH
(northern) and STH
(southern). This
setting effects the moon
phase display.
[SET] Exit Set Mode
[SET] + 2 seconds means press and hold the SET button for two seconds.
[SET] means press the SET button.
Table 5: Set mode sequence and commands summarization
6.4 Barometric Pressure Display
6.4.1 Viewing Absolute vs. RelativePressure
To switch between absolute and relative pressure, press and hold the
[PRESSURE -] button for two seconds.
Absolute pressure is the measured atmospheric pressure, and is a function of
altitude, and to a lesser extent, changes in weather conditions.
Absolute pressure is not corrected to sea-level conditions.
Relative pressure is corrected to sea-level conditions.
For further discussion of relative pressure and calibration, reference Section
6.4.4.