23
6.3 Setting mode
Press and hold the
SET
button for two seconds to enter the
SET
Mode. To
proceed to the next setting, press (do not hold) the
SET
button.
To exit the
SET
mode at any time, press the
LIGHT / SNOOZE
button.
Table 5 summarizes the set mode sequence and commands.
Comm
and
Mode
Settings
Image
[SET]
+ 2
seconds
Enter Set Mode,
Beep On or Off
Press [WIND +] to switch OFF
and ON.
This will prevent the beep from
sounding when pressing any
button.
[SET]
Clear Max/Min
Press [WIND +] to switch OFF
and ON.
When set to ON, the minimum
and maximum values reset every
day at midnight (00:00).
When set to OFF, the minimum
and maximum values must be
reset
manually.
[SET]
12 hour / 24 Hour
Format
Press [WIND +] to switch hour
format between 12 hour and 24
hour format.
[SET]
Hour
Press [WIND +] or [PRESSURE
-] to
adjust hour up or down.
[SET]
Minute
Press [WIND +] or [PRESSURE
-] to
adjust minute up or down.
