Ecowell Homeguard, Руководство пользователя

Страница: 6 / 8

- 10 - - 11 -
Vine
gar
citric
acid
200ml
100ml
100ml
Check Problem Solution
Maintenance
Do not keep water in the Pitcher for a long time (less than 3-5 days).
Store the device in completely dry conditions away from humidity or direct sunlight
when not used form any length of time. If the device is stored in too low a temperature,
it may not work as effectively and be damaged by frozen water inside the device.
Cleaning Outside
Use a dry cloth when you clean the outside of device. Do not use any chemicals or
detergents. The contacting part between Pitcher and Base station must be away from
water. If so, wipe the water and dry well.
Cleaning Inside
Do not remove the electrodes on the bottom of Pitcher, or wipe it with excessive force.
If you find any scale in Pitcher, clean inside of the Pitcher with care to avoid any damage
to electrodes. Then, operate the device for 3 minutes by adding salt. Keep the Pitcher for
one hour and rinse with clean tap water for next use.
Removing Scale
After using this device for a long time, if you find white scale in electrodes, clean its
surface. Pour 1) 200ml of warm water and 20g of citric acid (sold separately) or 2) 100ml
of water and 100ml of vinegar into the Pitcher and leave it for one hour more, the
electrode will be cleaned. Then, empty the pitcher and rinse it. Wash this way every
2 or 3 months.
LED is not turned on.
Is Adapter (and its plug) properly
connected to power socket?
Make sure to connect adapter to
power.
LED is turned on,
but bubbles do not come up.
Is Pitcher placed properly on
Base Station?
Put Pitcher on Base Station
properly and check if the
device works in order. power.
Bubbles are faintly coming up.
Is purified water or mineral water
used instead of tap water?
use tap water only. Also, you will
see more bubbles when salt is
added than when tap water is
used alone.
LED of operation button keeps
blinking with beeping sounds
in the middle of operation.
Did you put 1000ml of water and
1g of salt exactly?
If the water is not enough with too
much salt, the device will not
operate for safety reasons.
Retry the device after adding
suggested quantity of salt.
After finishing generation of
sterilizing water, the device
doesn't work by pressing
Operation Button.
Did you wait 3 minute after
previous operation?
It's normal that the device can't
be operated for 3 minute after
making electrolyzed water
LED is still on even after
completion.
After the water has been made, it's
normal for the LED in bottom of
Pitcher and the LED on Operation
Button to stay on to let you know
the operation is over
Remove Pitcher from Base Station
to turn off LED in the bottle.
However, this does not turn off
the LED on Base Station.
Spray doesn't work. Did you use hard water? If you use hard water,the spray nozzle
will be blocked because scale is
formed. Please avoid using hard
water if possible. If the spray
doesn't work well, soak the nozzle
in a diluted solution of vinegar
(1:1 mixture of vinegar and water).
If this still doesn't help, please
contact our customer center.
Spray doesn’t work If the spray doesn’t work well, pull
the trigger and hold for about 5
seconds, and flick (release quickly)
it and repeat this 2 ~ 3 times.
Unlike others, this spray has a
small cylinder in it to suck up water
by moving together with the trigger.
But, if the straw has no water inside
(or without a specific reason),
there may be some problems to
spray well. Once the straw is filled
with water, you won't see this
problem anymore.