![ECOWAY TitanDT300 2050 Скачать руководство пользователя страница 5](http://html.mh-extra.com/html/ecoway/titandt300-2050/titandt300-2050_user-manual_2355876005.webp)
4
WARNING
Beware of irritation or burn
Improper use of the toilet seat may cause irritation or burn.
When sitting for a long time on the toilet seat, switch the toilet seat
temperature adjustment to "OFF". When any of the following persons use a
heated seat or warm air drying, someone should switch the toilet seat
temperature adjustment to "OFF" and switch the drying air temperature to
"Low".
Young children, the elderly, and other users unable to set the temperature
appropriately themselves including; the ill, physically disabled and others who
do not have freedom of movement; those using any medicines that cause
drowsiness (sleeping or cold medicine), those who have been drinking
heavily, anyone severely fatigued and anyone else liable to fall asleep are at
risk.
This is an electrical product. Do not install it anywhere water is likely to get
on the product or anywhere with humidity high enough that water is likely
to form on the surface of this product.
When using the product in a bathroom, install a fan or ventilation port and
ensure good air flow through the bathroom.
Failure to do so may cause fire or electrical shock.
Always connect the TitanDT-300 to the cold-water supply.
Connecting to hot water supply may result in burns and equipment damage.
Make sure that a properly grounded (3 prong) outlet has been installed.
Failure to install a grounded outlet could cause electrical shock in the event
of a malfunction or short circuit.
Insert the power plug securely into the outlet.
Failure to do so may cause fire, over-heating, or short circuiting.
To unplug, hold the power plug, not the power cord.
Do not unplug by pulling the power cord. Pulling on the power cord may cause
damage and result in fire or over-heating.
If the power cord is damaged, avoid danger by having the manufacturer's
repair department or equivalent specialist replace it.
Always disconnect the power plug from the outlet before cleaning,
maintenance or inspection.
Failure to do so may cause electrical shock or malfunction.
Except when using "Nozzle cleaning".