5
SETTING RECHARGE START TIME
Default is 02:00 (2:00 a.m.).
To change it:
1
. Press SELECT (
¡
) to go
to the
Main menu
.
2
. Go to
Basic settings
screen.
3
. Go to
Recharge time
screen.
4
. Press DOWN (
6
) or UP
(
5
) to set the current
time. Hold button to go
faster.
5
. Press SELECT (
¡
), then
press LEFT (
3
) several
times to return to the
status screens.
MANUALLY RECHARGING
This may be done to assure an adequate supply of
conditioned water at times of unusually high water use.
For example, if you have guests, you could deplete
conditioned water capacity before the next automatic
recharge. A manual
recharge will restore 100%
conditioned water capacity
after complete. After long
periods of no water use
(vacations, etc.) it is
recommended to start a
recharge.
1
. Press SELECT (
¡
) to go
to the
Main menu
.
2
. Go to
Recharge
screen.
3
. Go to
Recharge Now
and press SELECT (
¡
)
to begin an immediate
recharge. Recharge
status screen appears
until recharge is
complete, or press LEFT
(
3
) twice to return to status screens.
Other recharge options:
=
Automatic
cancels a manually scheduled recharge
(if it has not already begun) and lets the electronic
control determine when to recharge next.
=
Schedule
sets a recharge to begin at the preset
recharge start time (see below)
SETTING SALT TYPE
Default is NaCl (Sodium
Chloride). Selecting KCl
(Potassium Chloride)
increases fill and brine/slow
rinse times. To change it:
1
. Press SELECT (
¡
) to
go to the
Main menu
.
2
. Go to
Salt settings
screen.
3
. Go to
Salt type
screen.
4
. Press DOWN (
6
) or UP
(
5
) to scroll to the other
salt type.
5
. Press SELECT (
¡
), then
press LEFT (
3
) several
times to return to the
status screens.
SETTING SALT LEVEL
Do this when adding salt to the conditioner/ refiner.
For , &
1
. Open the salt lid. The Salt level screen appears.
2
. Add and level salt, then
observe the decal on the
brinewell. Press UP (
5
)
or DOWN (
6
) to match
the lowest number
visible above the salt.
3
. Close the salt lid.
For all other Models
1
. Press SELECT (
¡
) to go
to the
Main menu
.
2
. Go to
Salt settings
screen.
3
. Go to
Salt level
.screen.
4
. Add and level salt, then
observe the decal on the
brinewell. Press UP (
5
)
or DOWN (
6
) to match
the lowest number
visible above the salt.
5
. Press SELECT (
¡
), then
press LEFT (
3
) several
times to return to the
status screens.
Conditioner/Refiner Programming
ECOWATER
S Y S T E M S
English
