23
FIG. 74
FIG. 76
FIG. 78
FIG. 75
FIG. 77
2
. Press the remote’s SELECT (
¡
) button to display the
device menu (See Figure 75).
3
. Press the DOWN (
6
) button to scroll through the
menu options until
Delete current device
is high-
lighted in a box (See Figure 76).
6
. To exit this screen, press the LEFT (
3
) button or
wait 30 seconds for it to exit automatically.
4
. Press the SELECT (
¡
) button. The screen shown in
Figure 77 will appear.
5
. Press the RIGHT (
4
) button. The screen shown in
Figure 78 will appear.
DELETING A DEVICE
To delete a device from the remote (possible reasons
for deleting a device include replacing or upgrading the
conditioner/refiner’s electronic control):
1
. Press the remote’s LEFT (
3
) or RIGHT (
4
) buttons
to manually advance to the status screen for the
device to delete. The device name will show in the
header. (See Figure 74).
Pressing the conditioner/refiner’s RIGHT (
4
) button
manually advances to the next screen in the sequence.
Pressing the LEFT (
3
) button manually returns to the
previous status screen. If no buttons are pressed for 30
seconds, the automatic rolling sequence resumes.
ECOWATER
S Y S T E M S
Conditioner/Refiner Operation
FIG. 79
*
Water remaining before the next recharge.
During normal operation, the EcoWater Systems condi-
tioner/refiner’s display shows up to five status screens.
Page 29 explains how individual screens can be turned
on or off. Each is shown for six seconds, in a rolling
sequence (See Figure 79).
The “Wireless status” screen will only be shown on Wi-
Fi systems. The check marks indicate the following:
P
WiFi
- The softener is connected to a Wi-Fi router.
P
Internet
- The softener is connected to a Wi-Fi router
which is connected to the internet.
*
NORMAL OPERATION
CONDITIONER/REFINER STATUS SCREENS
continued on the next page
