18
TO SET THE REMOTE TO ENGLISH
IF ANOTHER LANGUAGE IS DISPLAYED:
From the rolling status screens, press SELECT (
¡
).
Press DOWN (
6
) to scroll through the list until the
line immediately
above
the antenna ( ) symbol
is highlighted (See Figure 55), then press SELECT
(
¡
). Press UP (
5
) to scroll to
English
at the top of
the list, then press SELECT (
¡
) twice. Press LEFT
(
3
) to exit the menu.
SETTING THE LANGUAGE
Language is set independently on the remote and con-
ditioner/refiner (See Page 29 to set the conditioner/
refiner’s language). Fewer languages are available on
the remote. To change the remote’s language:
1
. Press the remote’s SELECT (
¡
) button to display a
Menu
screen.
2
. Press the DOWN (
6
) button to scroll through the
menu options until
Set language
is highlighted in a
box (See Figure 53). Press the SELECT (
¡
) button.
5
. Press the DOWN (
6
) or UP (
5
) buttons to scroll
through the list to the desired language, then press
SELECT (
¡
) to choose it.
6
. Press the SELECT (
¡
) button. The display will go
back to the menu shown in Figure 53, in the newly
set language.
7
. To exit this menu, press the LEFT (
3
) button or wait
30 seconds for it to exit automatically.
FIG. 53
FIG. 54
ECOWATER
S Y S T E M S
Non-Wi-Fi Systems Only: Remote Operation
3
. Depending on which devices are added, you could
see a message saying “This will delete all devices!
Continue?” If so, you would need to add the devices
again after changing the language. Press the RIGHT
(
4
) button to continue (or skip to Step 4 if this mes-
sage is not displayed).
4
. The Set language menu is displayed (See Figure
54). The current language has a black dot next to it.
FIG. 55
FIG. 50
FIG. 51
FIG. 52
2
. Press the remote’s SELECT (
¡
) button to display the
device menu.
3
. Press the DOWN (
6
) button to scroll through the
menu options until
RF signal strength
is highlighted
in a box (See Figure 51).
4
. Press the SELECT (
¡
) button, and the screen shown
in Figure 52 will appear. The more bars that are
filled in black, the stronger the signal. The signal
strength display updates every 15 seconds.
5
. To exit this screen, press the LEFT (
3
) button.
CHECKING RF SIGNAL STRENGTH
During installation of a system, it is useful to check the
strength of the signal from a water treatment device. If
you check the signal strength of a device communicat-
ing with the remote indirectly through another device,
the display will show the strength of the “weakest link”
in the chain of communication to the remote.
Begin by checking the signal strength between the con-
ditioner/refiner and the remote. If the signal is weak (2
bars or less on the display shown in Figure 52), move
the remote to a different location to try improving the
signal strength.
When adding additional devices, such as battery-oper-
ated drinking water systems (RO), keep in mind that the
signal strength display shows the “weakest link” in the
chain of communications. If the link between the RO
and the conditioner/refiner is weak, move the RO (if
possible) to a location closer to the conditioner/refiner
or remove metal objects between the two.
To check the signal strength for a particular device:
1
. Press the remote’s LEFT (
3
) or RIGHT (
4
) buttons
to manually advance to the status screen for the
device you want to check. The device name will
show in the header. (See Figure 50).
