ECOVACS Deebot D58, Руководство пользователя

Страница: 21 / 32

m
2
Note:
When you use virtual wall
,
please face marked ECOVACS to the block area you expect
.
Put virtual wall outside of the room you want to block to get best effect
.
The system would cancel virtual wall after it is set for two hours in order to save battery
.
As a result
,
every time the robot start new task and there needs to use virtual wall
,
please do and check whether
the switch on virtual wall is on and there is indicator
.
If you have paused the host for long time during its operation
,
please examine frequently that if the
switch is off to prevent from danger
.
Power:
from entering the blocked region.
Indicator: It is red when the power is on, and it shows virtual wall is ejecting
invisible beam to prevent robot form entering the blocked region.
Infrared transmitter: Ejecting invisible beam.
Infrared receiver: Receive invisible beam.
Press this key and virtual wall starts work which will prevent robot
Infrared
receiver
power
Indicator
transmitter
Use of virtual wall
It can be used to control the robot working within room or the certain region
you want it to clean. It applies invisible infrared beam to get 2 meters optical
band, which forms a blocked open area, such as doorway of the room, corridor
and staircase. You can apply virtual wall to stop robot getting close to the wire
of domestic appliances or computer and precision object.
Virtual wall can be put at the entrance of block region. You are allowed to
combine several walls together if necessary.
The beam of virtual wall would form a conical-shaped region to block robot.
The wall shall have beam around itself to prevent robot from getting
closer to it.
virtual
If you find the indicator becomes weaker or that robot is able to enter blocked region, please examine the battery
of virtual wall. Change into new battery if necessary.
19
E n j o y S m a r t e r L i f e !