ECOVACS DEBOT X1 OMNI, Инструкция по эксплуатации

Страница: 24 / 66

23
EN
No. Malfunction Possible Causes Solutions
5
No singal found. Unable to return
to the Station.
The Station is incorrectly placed.
Please place the Station correctly according to the instructions in
the
[ Charging DEEBOT ] section.
The Station is out of power or manually moved.
Check whether the Station is connected to power supply. Do not
manually move the Station.
DEEBOT does not start cleaning from the Station. It is recommended that DEEBOT start cleaning from the Station.
The charging route is blocked. For example, the door
of the room with the Station in is closed.
Keep the charging route clear.
6
DEEBOT returns to the Station
before it has finished cleaning.
The room is so large that DEEBOT needs to return
to recharge. Please enable Continuous Cleaning. For more details, please
follow the App instruction.
DEEBOT is unable to reach certain areas blocked by
furniture or barriers. Tidy up the area to be cleaned by putting furniture and small
objects in their proper place.
7 DEEBOT is unable to charge.
DEEBOT is not switched ON. Switch ON DEEBOT.
DEEBOT's Charging Contacts are not connected to
the Station Pins.
Make sure that the robot’s Charging Contacts have connected to
the Station Pins and the AUTO Mode Button flashes.
Check whether DEEBOT'S Charging Contacts and the Station are
dirty. Please clean these parts according to the instructions in the
[
Maintenance ] section.
The Station is not connected to the power supply. Make sure the Station is connected to the power.
The battery will be overcharged if DEEBOT is not
used for a long time.
It is recommended to regularly use DEEBOT. If the battery cannot
be charged because it has not been used for a long time, please
contact Customer Care for help.
8
Running is very loud during
cleaning.
Side brushes and main brush are entangled. Dust bin
and filter are blocked. It is recommended to clean the side brushes, main brush, dust
bin, filter, etc. regularly.
DEEBOT is in Max Mode. Switch to Standard Mode.
9
DEEBOT gets stuck while
working and stops.
DEEBOT is tangled with something on the
floor (electrical wires, curtains, carpet fringing, etc.). DEEBOT will try various ways to free itself. If it is unsuccessful,
manually remove the obstacles and restart.
DEEBOT might be stuck under furniture with an
entrance of similar height. Please set a physical barrier, or set a Virtual Boundary via the
ECOVACS HOME App.