ECOVACS DBX12, Инструкция по эксплуатации

Страница: 20 / 22

20 EN
No. Malfunction Possible Causes Solutions
8
AIVI Visual Detection Sensor
cannot recognize objects.
The cleaning area is not well illuminated.
Smart Recognition requires sufficient lighting. Please
make sure the areas to be cleaned are well illuminated.
AIVI Visual Detection Sensor lens is dirty or
blocked.
Clean the lens with a clean soft cloth, and make sure
the sensor is not blocked. Avoid using any detergent or
cleaning spray while cleaning.
The objects are too close to the AIVI Visual
Detection Sensor.
This is normal. The optimal distance of object
identification for AIVI Visual Detection Sensor is 50
cm(19.7 inches).
9
DEEBOT is not able to connect to
the home Wi-Fi network.
Incorrect home Wi-Fi username or password entered. Enter the correct home Wi-Fi username and password.
Incorrect App installed. Please download and install ECOVACS HOME App.
DEEBOT is not within range of your home Wi-Fi signal. Make sure DEEBOT is within range of your home Wi-Fi signal.
Network setup started before DEEBOT was ready.
Turn ON Power Switch. Press the RESET Button. DEEBOT is
ready for network setup when its Wi-Fi Indicator light flashes
slowly.
DEEBOT does not support 5 GHz Wi-Fi.
Make sure the robot has been connected with 2.4 GHz Wi-Fi
network.
10
DEEBOT does not clean the
whole area.
The cleaning area is not tidy.
Remove small objects from the floor and tidy up the cleaning
area before DEEBOT starts cleaning.
11
DEEBOT Side Brushes drop out of
place during use.
The Side Brushes are not correctly installed. Make sure the Side Brushes click into place when installing.