ECOTEST MKS-UM, Руководство по эксплуатации, Страница: 73 / 119

71
Figure 2.30 – LCD of the dosimeter (Navigation receiver control mode)
The number of highlighted segments of the instantaneous value indicator (5)
displays the number of satellites, which communicate information to the navigation
receiver.
2.3.6.9.2.3 To change the navigation receiver status shortly press
RAYS/RESTART. If the navigation receiver is off, symbols (2) are shown as “-
OFF”, and the status symbol (3) is not highlighted. If the navigation receiver is on -
symbols (2) are shown as “-On-”, and the status symbol (3) is continuously
highlighted or blinking. Status symbol blinking (3) indicates the lack of reliable
information from the navigation receiver.
2.3.6.9.3
Submode of the control unit of the dosimeter “Viewing and
programming of new local time offset relative to GMT”
2.3.6.9.3.1 If the navigation receiver is enabled, you can view the current local
time offset relative to GMT and set the new offset. Press THRESHOLD to view the
current offset. In this case, the control unit should be in the "Navigation receiver
control" mode.
The LCD will include the following information (Figure 2.31):
- hours of local time offset relative to GMT (1);
- minutes of local time offset relative to GMT (2);
- symbol of local time offset relative to GMT (3) – “-Add” – when local time
is generated, the offset is added to the time obtained from the navigation receiver; “-
Sub” – offset is subtracted;
- navigation receiver status symbol (4);
- battery status symbol (5).
This information is displayed on the LCD while THRESHOLD is held down
(but no longer than 4 s).