Ecotap Duo Wide, Руководство пользователя, Страница: 26 / 30

26
Drawing 1.3
20. MAINTENANCE
Always disconnect the charging station from its power supply
completely and read the manual before performing any
maintenance or fixing any malfunctions.
Repairs or replacements of components may only be done
if using products that are approved by the supplier. When in
doubt, please contact Ecotap® first.
Repairs and replacements must always be performed by an authorised
person / specialist. The maintenance must always comply with and be
performed in compliance with NEN3140 and NEN50110 low voltage EU
directives.
Check the charging station for any leaks.
Test the heating element and the thermostat together to make sure they
are working correctly. The thermostat must be set to five degrees or to frost
protection mode. Check the connections on the power supply cable and
ensure a fixed connection of between 4 and 5 Nm.
Treat any minor damage to the charging station with corrosion-resistant
paint in the right shades (Ecotap® green ral.6018 & white ral.9016).
Treat the cylinder locks with graphite powder or a suitable oil product if they
require any maintenance.
ENGLISHENGLISH