Ecosys ECOSYS M6035cidn, Руководство по эксплуатации

Страница: 28 / 50

10-27
Troubleshooting > Troubleshooting
1105 Failed to send via SMB. Check the following settings.
[
System Menu/Counter ] key > [ System/Network ] >
[ Network ] > [ TCP/IP Settings ] > [ Protocol Detail ] >
[ SMB Client (Transmission) ]
page 8-26
Failed to send the e-mail. Select [ On ] of the SMTP settings on the Command
Center RX.
page 2-53
Failed to send via FTP. Check the following settings.
[
System Menu/Counter ] key > [ System/Network ] >
[ Network ] > [ TCP/IP Settings ] > [ Protocol Detail ] >
[ FTP Client (Transmission) ]
page 8-26
1106 Failed to send the e-mail. Check the sender address of SMTP on the Command
Center RX. page 2-53
1131 Failed to send via FTP. Enable the SSL.
[
System Menu/Counter ] key > [ System/Network ] >
[ Network ] > [ Secure Protocol ] > [ SSL ]
page 8-30
1132 Failed to send the e-mail. Check the following of the SMTP server.
•
Is SMTP over SSL available?
• Is the encryption available?
Refer to the
Command
Center RX
User Guide .
Failed to send via FTP. Check the following of the FTP server.
•
Is FTPS available?
• Is the encryption available?
—
2101 Failed to send via SMB. Check the network and SMB settings.
•
The network cable is connected.
• The hub is not operating properly.
• The server is not operating properly.
• Host name and IP address
• Port number
—
Failed to send via FTP. Check the network and FTP settings.
•
The network cable is connected.
• The hub is not operating properly.
• The server is not operating properly.
• Host name and IP address
• Port number
—
Failed to send the e-mail. Check the network and Command Center RX.
•
The network cable is connected.
• The hub is not operating properly.
• The server is not operating properly.
• POP3 server name of the POP3 user
• SMTP server name
page 2-53
Error
Code
Message Corrective Actions
Reference
Page