EcoSunTec IMAP-1000, Руководство по эксплуатации

Страница: 7 / 24

OPERATION
TURNING THE HEATER ON
Turn the MASTER SWITCH to the ON position so it is
illuminated. The unit will now operate in the air purification
mode only. To turn on the heating mode select the area or
room size setting desired-LARGE, MEDIUM or SMALL.
Wait for the heater to start operating in about 45 seconds.
Then adjust the temperature (thermostat) setting as desired.
TEMPERATURE SETTING (thermostat)
Use the heater’s (1-15) up and down arrows to adjust the
Temperature Setting. Once the selected temperature is
reached the heater will maintain the temperature by cycling
on and off. Each number up or down changes the
temperature by 2.5 degrees. See page11-temperature
(thermostat) settings.
TO TURN HEATER OFF
Turn the POWER BUTTON to the OFF position. The fan will
continue to run cooling down the unit and will shut off
automatically. It is then safe to turn off the master switch
and unplug the unit. Allow it to cool about 10 minutes before
performing humidifier and/or filter maintenance.
TIP OVER SAFETY FEATURE
If the EcoSunTec Infrared Moist Air Purifying Space Heater
is tipped over,
the power will automatically shut off .
Return the unit to its level position and it will resume in the
air purification mode. Then adjust the area/room size and
temperature as desired.
4