EcoSunTec IMAP-1000, Руководство по эксплуатации

Страница: 13 / 24

5) Allow the filter to air dry completely before reinstalling on
to the back of the heater.
6) DO NOT force the filter to dry using any type alternative
methods other than drip dry. Let it air dry completely.
7) Reinstall the filter on to the back of the unit by pushing it
up against the springs then pushing the filter in place over
the brackets that hold the filter in place.
The “ Temperature Limiting Control ” safety feature within
the unit will shut off the heater if the filter is overly dirty. If the
heater stops working, turn off the master switch and allow
the heater to cool down. Clean the filter following steps 1-7
on this page. Turn the heater on and resume use. If the unit
continues to shut down or the unit does not reboot itself,
please call EcoSunTec Technical Assistance
803-319-4836 or toll free at 877-326-4320
10