Ecostrad_Sunglo_V1.2_25062021 6
22.
Parts of the heater may exceed 200 °C. Contact with the heating tube,
reflector, or metal parts near the heating tube, may cause severe
burns. Do not let bare skin come into contact with the hot surfaces of
the heater.
23.
Never place hands under the heating elements. Always allow the heating
element to cool for at least 10 minutes before touching the heating tube or any
adjacent parts.
24.
This product contains recyclable materials. Do not dispose of this product with
regular household waste. Please contact your local authority for collection and
disposal information.
4 | Installation
4 – 1 Installation Restrictions
1.
This heater should be installed by a competent
person – i.e., a qualified electrician.
2.
Always disconnect the heater from the electrical
supply and allow it to cool before installation.
3.
Do not install the heater on a flammable surface.
4.
The heater must be kept a minimum of 1m away
from people, animals, and flammable materials
such as wood, cardboard and cloth.
5.
The lowest part of the heater must be located at
or above a minimum height of 1.8m from ground
level, so that the heater cannot be touched when
in operation.
6.
Before drilling, ensure that there are no wires or
water pipes in the area where the heater is to be installed.
7.
The heater should be mounted a minimum of 0.4m away from the ceiling and
adjacent walls.
