background image

8 ft. LED Color Changing Rope Light

Use and Care Guide

Installation

PREPARING TO EXTEND THE
ROPE LIGHTS

CONNECTING THE ROPE LIGHTS

MOUNTING THE ROPE LIGHTS

Ensure all rope lights are

unplugged before adding the

additional rope light (A) to the series.

Connect the last rope light in the

series and the extension rope.

light (A) together and ensure the

connectors are tightly secured.
Attach the end cap (1) to the last rope

light in the series and ensure the 

connection is secure.

Remove the end cap (1) from the last

rope light in the series by turning

counterclockwise.

Remove the power cord (2) from additional

extension rope lights (A).
Extend up to 96ft (29.2 m) maximum. Use only

the following Commercial Electric rope light

extension segments: 1005580337

or 1005580338.

Item # 1005580338
Model # AL13-8FT-RGBWW-1-A

Make sure the distance between two 

lines of rope light is at least 1/2 in. (12 mm).

Mounting clips should be evenly spaced 

and be a maximum of 3 ft. (0.91 m) apart. 

Insert the screw (C) through the

opening in the mounting clip (B).

Screw the mounting clip (B) into

position at the installation location.
Place the rope light (A) securely into

the mounting clip (B).

WARNING: 

Do not install the rope light within 

16 ft. (4.87 m) of pool or spa. Do not install rope 

lighting in cabinets, tanks, or enclosures of any kind.

WARNING: 

This product has a polarized plug (one

blade is wider than the other) as a feature to reduce

the risk of electric shock. This plug will fit in a 

polarized outlet only one way. If the plug does not fit

fully in the outlet, reverse the plug. If it still does not fit,

contact a qualified electrician. Never use with an

extension cord unless the plug can be fully inserted.

Do not alter the plug.

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation.

FCC WARNING

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 

in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does 

cause harmful interference to radio or television reception, which can be determined by turning the equipment 

off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the 

user’s authority to operate the equipment.

WARNING: 

When using this product outdoors,

basic safety precautions should always be followed 

to reduce the risk of fire, electric shock, and

personal injury.

WARNING: 

Do not cover this product as the

covering may cause the flexible light to overheat

and either melt or ignite.

WARNING: 

Do not puncture, cut, shorten, or

splice the flexible lighting.

WARNING: 

Do not use if there is any damage to

the light or cord insulation. Inspect periodically.

CAUTION:

 

All units must be unplugged before

you add additional segments. Only use segments

recommended by the manufacturer of this lighting

system.

CAUTION:

 

Ensure all connections and the end

cap on the last segment are tightly secured to

prevent the entry of water.

WARNING: 

Secure the rope lights using only the

mounting clips provided. Do not secure this product

with staples, nails, or similar objects that may

damage the insulation.

WARNING: 

Do not submerge the flexible light in 

liquids or use the product in the vicinity of standing

water or other liquids.

WARNING: 

Do not mount or secure the rope

light in a manner than can cut the outer jacket or

damage the cord insulation. Inspect the rope light

carefully before use and discard any rope lights

that have a broken outer jacket, loose connections,

or frayed wire insulation.

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

The RF remote controller included utilizes a 3V CR2025 battery; only replace with same battery 

type. Please dispose of batteries properly. Batteries are not a toy! If swallowed, contact local 

emergency services immediatley.

Ground Fault Circuit Interrupter (GFCI) protection should be provided in the circuits

or outlet to be used for outdoor use. Receptacles are available that have built-in GFCI

protection.

Only use outdoor extension cords such as typ SW, SOW, STW, STOW, SJW, SJOW, SJTW,

or SJTOW. This designation is marked on the wire of the extension cord.

The rated voltage for this product is 120VAC, 60Hz, 9.6W, 0.1A.

Do not operate this product with the flexible light tightly coiled.

Do not route the cord or flexible light cable through walls, doors, windows, or any

similar part of a building structure.

Do not subject flexible lighting to continous flexing.

Do not exceed the maximum extension length in feet permitted by the marking. The 

maximum extension length for this rope light is 96ft. (29,2 m).

D - Handheld Remote Control x 1

A - 8ft. Rope Light x 1

B - Mounting Clip x 4

C - Screw x 8

E - 3V CR2025 Battery

Please contact 1-877-527-0313 for further assistance.

HOMEDEPOT.COM/ECOSMART

Отзывы: