ecosens ECO-11, Руководство пользователя, Страница: 4 / 4

work after the load stop working in the more than 10LUX ambient-light, the load
should work if you cover the detection window with the opaque object (towel etc).
Under the no inductor signals conditions, it is normal for the load to stop working
within 5~15sec.
NOTES:

Electrician or experienced human can install it.

The unrest objects can’t be regarded the installation
basis-face.
 There aren’t hinder or unrest objects effecting
detection in front of the detection window

Avoid installing it near temperature alteration zones,
for example: air condition, central heating etc.
 Please don’t open the case for your safety if you find
the hitch after installation.
SOME PROBLEM AND SOLVED WAY :
1.
The load don’t work:
a. check the power and the load.
b.
If the function switch is in the “auto” condition.
c. If the load is good.
d. Please check if the working light correspond to the ambient- light.
2. The sensitivity is poor:
a. Please check if the front of the detection window has the hinder that
effect to receive the signals.
b. Please check the ambient temperature.
c. Please check if the signal source is in the detection field.
d. Please check the installation height.
e. If the moving orientation is correct.
3.
The sensor can’t shut off the load automatically:
a. If there is continual sensor signal in the detection field.
b. If the time-delay be set to the longest.
c. If the power correspond to the instruction.
d. If the temperature change near the sensor. (air condition, central
heating etc.)
Auto
Off
Time adjusted
LUX adjusted