ecosens ECO-11, Руководство пользователя, Страница: 3 / 4

INSTALLATION: (see the following diagram)

Switch off the power

Take off the sensor board-face and the nail.

Connect the power and the load wire with the sensor according to connection-wire
diagram

The sensor is fixed on the selected position.

You can switch on the power and test it after covering the board-face.
CONNECTION-WIRE DIAGRAM
(see the
right Fig)
TEST:

Turn the control-light knob anti-
clockwise on the maximum (“sun” position), turn the
time knob anti-clockwise on the minimum.

Switch on the power, the controlled load work after 5~10sec, under the no inductor
signals conditions, the load should stop working within 5~30sec.

After the first is out, make it sense again after 5~10sec. The load should work and it
stops working within 5~15sec.

Turn the light-control knob clockwise on the minimum, the inductor load should not
Correct moving orientation incorrect moving orientation
2 1 3
58.5