15
NO
IT
AR
EP
O
The battery charge is sufficient.
The tires are not damaged.
Warning:
Always inspect the scooter for roadworthiness before use.
After some time of usage, the securing lever might become loose, so please check the status
of the securing lever before each use. And if loose, please tighten it from the bolt/ screw below.
Find a private area without road traffic and with enough space for you to get used to your
EcoReco scooter.
Note that the T-bar height might feel differently once you step on the deck. Readjust it if
needed and make sure to tighten the T-bar tightening screw.
Lift up the kickstand.
If riding your EcoReco scooter for the first time, familiarize yourself with its movement and
balance by “rolling” it without the power on: Depending on the stance you prefer, put your
dominant leg on the front of the deck and the other one on the ground, with your head
facing forward. Use the leg on the ground to push the scooter forward. Once you gain some
speed, gently lift up that leg and rest it on the back of the deck. If needed, adjust your grip
on the handlebars to remain balanced. Repeat the same movements once the scooter
slows down to keep it going.
Riding the scooter without power does not damage it.
Press the EcoReco power button on the dashboard for a second until the display lights up.
OPERATING TIPS
When the brake is activated, the accelerator is deacti-
vated. See the “Brake” section for guidance on the brake
and brake lever.
A slight whirring sound is normal when the scooter is
powered on and moving.
To preserve the battery, the scooter shuts off automati-
cally after 3 minutes of inactivity.
Do not turn on the power until you feel confident “rolling”.
Содержание M3
Страница 3: ......