Ecoray ORANGE 1040HF, Руководство пользователя

Страница: 28 / 49

- 28 -
Diagnostic X-ray Unit
USER MANUAL

APR Mode
1) There are minimum of 8 and maximum of 16 APR mode can be set in this
unit.
2) 16 Mode Store
When this unit dispatch from the factory, it set as 16 mode. The 16 mode set
procedure is as follow.
There are number key from 1 to 8 in operation panel. To store APR, click
one of the number from 1 to 4 first then click another number from 5 to 8 and
then set the kV and mAs value by using UP/DOWN key. To save the value,
press and hold the store key until you hear buzzer sounds. DO NOT press
the numbers from 1-4 key and 5-8key at the same time.
3) 8 Mode Store
To switch APR mode to 8 Mode, when the main switch is "OFF" press and
hold 1 and 4 key at the same time and then turn on the main switch.
In 8 Mode, the user can set kV and mAs values in each numbers through 1
to 8. To save, click the number from 1 to 8 and set kV and mAs value by using
UP/DOWN keys and press and hold the
“STORE” key until you hear buzzer
sounds.
4) Mode Change
To switch 8 Mode or 16 Mode, when the main switch is "OFF" press and hold
1 and 4 number keys at the same time and then turn
“ON” the main switch.
.
Mode APR Key
16 Mode
1+5, 1+6, 1+7, 1+8 / 2+5, 2+6, 2+7, 2+8
3+5, 3+6, 3+7, 3+8 / 4+5, 4+6, 4+7, 4+8
8 Mode 1, 2, 3, 4, 5, 6, 7, 8
Note: During Normal operation check, if there are any error found
then contact manufacture before regular uses.