OZONE PLATE INSTALLATION
The Ozone Blaster Adjustable utilizes EcoTech
Purification Plates.
1. Remove the rear lint screen.
2. Fully insert the EcoTech Purification Plates
(a,& b) between the guide-grooves in the top
and bottom of the plate cage (between the
posts and clips) making sure the metal clip
on each side of the plate is in contact with the
metal screen on the plate.
3. Re-install lint screen as shown below.
LINT SCREEN INSTALLATION
1. Always install bottom of lint screen first.
2. The white lint screen tab should depress the
safety switch arm down.
3. Fit top of lint screen into cabinet.
Unit will not operate if safety switch is
not depressed.
5
Lint
Screen
Tab
1
2
3
1,2,3
